Handheld Type Screw Feeder Driver With Automatic Screw Feeding System

Intro:

Screw locking machine is made of 3 main parts: 1.Screw feeding system. 2. Screw sorting system. 3. Screw locking system.

These 3 systems are controlled by the machine's program.

Hand-held automatic locking screw machine feeds screws in a turbine way and order screws on a vibration guide rail, and transport screws to Screw Sorting System through magnetic resonance, then sort one screw per time and send it to screwdriver nozzle, finally electric or pneumatic screwdriver will lock the screw into products.

Suitable:

Screw feeding and tightening machine is for M2.0-M6.0 screws. The screw length should be at least 1.3 times of the screw head diameter, or the screws can not be fed well.

It works for kinds of screws and products.

Features:

1. Automatic screw feeding, sorting and locking for various shapes screws. One-hand operation.

2. Torsion precision and convenient adjustment, ensure the quality of screw locking

3. Turbine feeding, low volume and noise, convenient maintenance. Light weight and small, mobility and save space.

4. Warning function when lack of screws.(Acousto-optic alarm)

5. High efficiency. No need to pick up screws, move screws and put screws. Just need to lock the screws aimed at the screw hole.

6. Sensor controls screws feeding one by one to avoid feeding repetition.

7. Can lock screws very fast, around lock 60 screw per minute.

Parameter:

Working conditions:

1, Screw specification requirements:
The screw length should be over 1.3 times greater than the screw cap’s diameter.

If the screw cap is greater than the screw length, the screw cap may come out first, because the screw will turn over during feeding screws.

The screw length should be less than 45mm.

Pictures of screw feeding and tightening machine

Screw feeding and locking machine structure

automatic screw feeder and driver

auto screwdriver machine

Handheld Type Screw Feeder Machine Low Noise For Feed And Tighten Screws Images